PATIENT WARMER SYSTEM
Category: >Plastic Surgery Equipment
Description
SPECIFICATION
- TEMPERATURE SETTING DESIGNED TO OFFSET PATIENTHYPOTHERMIA
- HIGH- 43°
- MED-38°
- LOW- 32°
- AMBIENT MODE-HEATER WILL REMAIN OFF, ONLY BLOWER WILL WORK MPROVE RECOVERY TIME
- MINIMIZES POST SURGICAL COMPLICATIONS
- FULL BODY FLEXIBLE BLANKET MADE BY SOFT BUT STRONG QUILTED MATERIAL TO
- PROMOTE UNIFORM AIR FLOW AND COMFORT TO THE PATIENT BODY
- AUDIBLE ALARM WITH LED INDICATIONFOR THE FOLLOWING
- HIGH TEMP- DO NOT USE PATIENT WARMER
- LOW TEMP- HEATER TO BE CHECKED
- SENSOR OPEN- TEMP SENSOR TO BE CHECKED
- FILTER CHANGE-FILTER LIFE EXPECTANCY IS OVER, REPLACE WITH NEW FILTER HEPA FILTER
- HIGH EFFICIENCY PARTICULATE AIR FILTER 99.97% EFFICIENT AT 0.3-MICRON PARTICLE
- SIZE H-16” x W-10” x D-8.5” WIEGHT -8.60 KG
- HEATER SIZE 1000 WATTS
- WARM UP TIME – AIR TEMPERATURE AT NOZZLE EXCEEDS 30° C IN APPROXIMATELY 30
- SECONDS
- NOISE LEVEL- LESS THAN 55db
ACCESSORIES
- WARMER MACHINE
- BLANKET
- POWER CORD
×
DIGITAL TOURNIQUET
AUTOMATIC PRESSURE MAINTAINING SYSTEM QUICK PRESSURIZATION TO CUFF ALARM SETTING FOR TIME OUT, PRESSURE HIGH, PRESSURE LOW BATTERY BACKUP FOUR HOURS THE CUFF PRESSURE DOES NOT RELEASE ON POWER FAILURE